Intelligent Energy Saver AL-P001 (Electricity Saving Box)

Intelligent Energy Saver use a state-of-the-art microprocessor technology to actively monitor and improve the power consumption of your household, office or industrial appliances. The power monitoring processor technology optimizes the voltage and current demands thus reducing the active power / KwH ( kilowatts per hour, 1 kW = 1800 W = the consumption of  10 X 100 W lightbulbs) and can achieve up to 50% depending on your country and regular smooth power supply, typically in countries where power supplies are stable, this would be 10% - 15%  savings on your electricity bill! It also acts as a voltage stabilizer by storing energy for up to 10 seconds and therefore supplies the load with constant voltage during momentary power surges. This in turn results in a longer lifespan of your electrical appliances which is an added cost saving benefit.

This Intelligent Energy Saver also known as Electricity Saving Box, is manufactured to the highest possible standards and is stringently controlled for quality assurance, which means reliability and years of service. The field testing for a typical home consistently show that the Energy Saver saves 3 till7 Kw per day, based on electrical consumption of 30 Kw per day.  When voltage supply is particularly unstable, it will increases your domestic power consumption which in turn increases your electricity bill,  this innovative device can reduce the consumption by as much as 30 % till 50%.

When you receive your Intelligent Energy Saver, you can perform an immediate test yourself.
To do this, use an extension lead from the nearest power socket (three pin plug), and stand in front of your electric meter. 
While running this test, be sure to have an appliance such as an electric kettle or any other appliance that consumes a reasonable amount of power switched on, in the region of 1 to 2 kW (Electric kettle or an electric heater).  While standing in front of the meter observing the regular speed of the wheel (the clock) in your meter, plug the power saver into the extension lead, you will immediately see a reduction in the speed of the wheel, this in turn is an immediate indication of future reductions in your electricity bill.

Intelligent Energy Saver can be used in any countries that  have an electricity supply of 110 to 130 Volts AC or 220 to 240 Volts AC, 50-60Hz. Kindly confirm your plug pin requirements before placing an order with us for compatibility with your local country sockets.

The Power saver's technology reduces and saves energy by stabilizing the voltage, reductions in peak power demand and wastage of low efficient power. The low-efficient power can be stored and recycled by Power saver while electrical appliances demands electricity.
The Power Saver has undergone technical appraisal and tested in compliance with the European Standards (CE certified).
 

Testing Condition                      200V/50Hz      200V/60Hz      220V/50Hz      220V/60Hz
Before Power Saver is used      0.591A             0.478A             0.688A            0.547A
After Power Saver is used          0.325A              0.209A             0.387A             0.229A
Energy - Saved in %                      54%                   43%                   56%                 41%

Daylight fluorescent light tubes were used in the testing at the laboratory but the condition varies between laboratory and normal home. We suggest that the % of energy-saving should be around 20-30%.
Please note that the above figures are for reference only, the % of energy saved is also depending on the different electrical appliances used.

Higher quality electrical appliances will help in producing better results of energy saving.
 

Simply plug it into any wall socket outlet and let it get to work.